Note: You can also restore defaults via the web configurator.(refer to the Maintenance
chapter).
2.4 Navigating the Web Configurator
We use the P-662HW-D1 web screens in this guide as an example. Screens vary slightly for
different G-1000 v2 models.
2.4.1 Navigation Panel
After you enter the password, use the sub-menus on the navigation panel to configure G-1000
v2 features. The following table describes the sub-menus.
Figure 5
Web Configurator: Main Screen
Note: Click the
embedded help.
Table 4 Web Configurator Screens Summary
LINK/ICON
Wizard
Logout
Chapter 2 Introducing the Web Configurator
Use
submenus
to configure
G-1000 v2
features.
icon (located in the top right corner of most screens) to view
SUB-LINK
FUNCTION
Use these screens for initial configuration including general
setup, wireless security and IP address assignment.
Click this icon to exit the web configurator.
ZyXEL G-1000 v2 User's Guide
Click the Logout icon at any time
Click the Logout icon at any time
to exit the web configurator.
to exit the web configurator.
35