Navigating The Smt Interface; Table 60 Main Menu Commands - ZyXEL Communications ZyXEL ZyAIR G-3000H User Manual

Table 59 SMT Menus Overview (continued)
MENUS
24 System Maintenance 24.1 System Status

15.4 Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your
ZyAIR.
Several operations that you should be familiar with before you attempt to modify the
configuration are listed in the table below.

Table 60 Main Menu Commands

OPERATION
Move down to
another menu
Move up to a
previous menu
Move to a "hidden"
menu
Move the cursor
Entering information Type in or press
Chapter 15 Introducing the SMT
SUB MENUS
24.2 System Information and
Console Port Speed
24.3 Log and Trace
24.4 Diagnostic
24.5 Backup Configuration
24.6 Restore Configuration
24.7 Upload Firmware
24.8 Command Interpreter Mode
24.10 Time and Date Setting
24.11 Remote Management Setup
KEYSTROKE DESCRIPTION
[ENTER] To move forward to a submenu, type in the number of the
desired submenu and press [ENTER].
[ESC] Press [ESC] to move back to the previous menu.
Press [SPACE BAR] Fields beginning with "Edit" lead to hidden menus and
to change No to Yes have a default setting of No. Press [SPACE BAR] once to
then press [ENTER]. change No to Yes, then press [ENTER] to go to the
"hidden" menu.
[ENTER] or [UP]/ Within a menu, press [ENTER] to move to the next field.
[DOWN] arrow keys. You can also use the [UP]/[DOWN] arrow keys to move to
the previous and the next field, respectively.
You need to fill in two types of fields. The first requires you
[SPACE BAR], then to type in the appropriate information. The second allows
press [ENTER]. you to cycle through the available choices by pressing
[SPACE BAR].
G-3000H User's Guide
24.2.1 System Information
24.2.2 Console Port Speed
24.3.2 Syslog Logging
24.3.4 Call-Triggering Packet
24.7.1 Upload System Firmware
24.7.2 Upload System Configuration
File
173