Getting To Know Your Device; Introducing The Zyxel G-1000 V2; Features; Physical Features - ZyXEL Communications Wireless-11g Access Point ZyXEL G-1000 v2 User Manual

Getting to Know Your Device

This chapter introduces the main features and applications of the G-1000 v2.

1.1 Introducing the ZyXEL G-1000 v2

The ZyXEL G-2000 Plus v2 is a wireless access point. The G-1000 v2 offers highly secured
wireless connectivity to your wired network with IEEE 802.1X, WEP data encryption,
WPA(2) (Wi-Fi Protected Access) and MAC address filtering.
The G-1000 v2 is easy to install and configure. The embedded web-based configurator and
SNMP network management enables remote configuration and management of your G-1000
v2.

1.2 Features

The following sections describe the features of the G-1000 v2.
Note: See the product specifications in the appendix for detailed features and
standards support.

1.2.1 Physical Features

10/100M Auto-negotiating Ethernet/Fast Ethernet Interface
This auto-negotiating feature allows the G-1000 v2 to detect the speed of incoming
transmissions and adjust appropriately without manual intervention. It allows data transfer of
either 10 Mbps or 100 Mbps in either half-duplex or full-duplex mode depending on your
Ethernet network.
10/100M Auto-crossover Ethernet/Fast Ethernet Interface
The LAN interface automatically adjusts to either a crossover or straight-through Ethernet
cable.
Reset Button
The G-1000 v2 reset button is built into the side panel. Use this button to restore the factory
default password to 1234; IP address to 192.168.1.2 and subnet mask to 255.255.255.0.
Chapter 1 Getting to Know Your Device
ZyXEL G-1000 v2 User's Guide
C
H A P T E R
1
27