Figure 30 System General Setup; Table 30 System General Setup - ZyXEL Communications Wireless-11g Access Point ZyXEL G-1000 v2 User Manual

ZyXEL G-1000 v2 User's Guide

Figure 30 System General Setup

The following table describes the labels in this screen.

Table 30 System General Setup

LABEL
System Setup
System Name
Domain Name
Administrator
Inactivity Timer
Password Setup
User Password
New Password
Retype to
Confirm
Apply
Cancel
76
DESCRIPTION
Enter a name to help you identify your ISP on the network. This is not a required
field and you can safely leave this field blank.
Enter the domain name (if you know it) here. If you leave this field blank, the ISP
may assign a domain name via DHCP.
The domain name entered by you is given priority over the ISP assigned domain
name.
Type how many minutes a management session (either via the web configurator or
CLI (Command Line Interpreter)) can be left idle before the session times out. The
default is 5 minutes. After it times out you have to log in with your password again.
Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle (not
recommended).
Type your current password. The default password is 1234.
Type your new password (up to 30 characters). Note that as you type a password,
the screen displays a (*) for each character you type. After you change the
password, use the new password to access the G-1000 v2.
Type the new password again for confirmation.
Click Apply to save your changes back to the G-1000 v2.
Click Cancel to begin configuring this screen afresh.
Chapter 7 System