Wpa(2) Authentication Screen; Figure 19 Wireless: Wpa(2) - ZyXEL Communications Wireless-11g Access Point ZyXEL G-1000 v2 User Manual

ZyXEL G-1000 v2 User's Guide
Table 19 Wireless: WPA(2)-PSK
LABEL
Group Key Update
Timer (In
Seconds)
Apply
Reset

4.4.5 WPA(2) Authentication Screen

In order to configure and enable WPA(2) Authentication; click the Wireless LAN link under
Network to display the Wireless screen. Select WPA or WPA2 from the Security Mode list.

Figure 19 Wireless: WPA(2)

58
DESCRIPTION
The Group Key Update Timer is the rate at which the AP (if using WPA(2)-PSK
key management) or RADIUS server (if using WPA(2) key management) sends a
new group key out to all clients. The re-keying process is the WPA(2) equivalent of
automatically changing the WEP key for an AP and all stations in a WLAN on a
periodic basis. Setting of the Group Key Update Timer is also supported in
WPA(2)-PSK mode. The G-1000 v2 default is 1800 seconds (30 minutes).
Click Apply to save your changes back to the G-1000 v2.
Click Reset to reload the previous configuration for this screen.
Chapter 4 Wireless LAN