Snmp; Figure 27 Remote Management: Ftp; Table 27 Remote Management: Ftp - ZyXEL Communications Wireless-11g Access Point ZyXEL G-1000 v2 User Manual

Figure 27 Remote Management: FTP

The following table describes the labels in this screen.

Table 27 Remote Management: FTP

LABEL
Port
Server Access
Secured Client IP
Address
Apply
Cancel

6.6 SNMP

Simple Network Management Protocol (SNMP) is a protocol used for exchanging
management information between network devices. SNMP is a member of the TCP/IP
protocol suite. Your G-1000 v2 supports SNMP agent functionality, which allows a manager
station to manage and monitor the G-1000 v2 through the network. The G-1000 v2 supports
SNMP version one (SNMPv1) and version two (SNMPv2). The next figure illustrates an
SNMP management operation.
Note: SNMP is only available if TCP/IP is configured.
Chapter 6 Remote Management Configuration
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the G-1000 v2 using
this service.
A secured client is a "trusted" computer that is allowed to communicate with the G-
1000 v2 using this service.
Select All to allow any computer to access the G-1000 v2 using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the G-1000 v2 using this service.
Click Apply to save your customized settings and exit this screen.
Click Cancel to begin configuring this screen afresh.
ZyXEL G-1000 v2 User's Guide
71