No Security; Figure 16 Wireless: No Security; Table 17 Wireless No Security - ZyXEL Communications Wireless-11g Access Point ZyXEL G-1000 v2 User Manual

ZyXEL G-1000 v2 User's Guide
Table 16 Wireless LAN: General
LABEL
Apply
Reset
See the rest of this chapter for information on the other labels in this screen.

4.4.1 No Security

Select No Security to allow wireless stations to communicate with the access points without
any data encryption.
Note: If you do not enable any wireless security on your G-1000 v2, your network is
accessible to any wireless networking device that is within range.

Figure 16 Wireless: No Security

The following table describes the labels in this screen.

Table 17 Wireless No Security

LABEL
Security Mode
Apply
Cancel
54
DESCRIPTION
Click Apply to save your changes back to the G-1000 v2.
Click Reset to reload the previous configuration for this screen.
DESCRIPTION
Choose No Security from the drop-down list box.
Click Apply to save your changes back to the G-1000 v2.
Click Cancel to reload the previous configuration for this screen.
Chapter 4 Wireless LAN