System Timeout; Figure 24 Remote Management: Www; Table 25 Remote Management: Www - ZyXEL Communications Wireless-11g Access Point ZyXEL G-1000 v2 User Manual

ZyXEL G-1000 v2 User's Guide
• The IP address in the Secured Client IP field does not match the client IP address. If it
does not match, the G-1000 v2 will disconnect the session immediately.
• There is already another remote management session with an equal or higher priority
running. You may only have one remote management session running at one time.
• There is a firewall rule that blocks it.

6.1.2 System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds).
The G-1000 v2 automatically logs you out if the management session remains idle for longer
than this timeout period. The management session does not time out when a statistics screen is
polling.
6.2 WWW
To change your G-1000 v2's World Wide Web settings, click Advanced > Remote MGMT
to display the WWW screen.

Figure 24 Remote Management: WWW

The following table describes the labels in this screen.

Table 25 Remote Management: WWW

LABEL
Port
Server Access
Secured Client IP
Address
68
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the G-1000 v2 using
this service.
A secured client is a "trusted" computer that is allowed to communicate with the G-
1000 v2 using this service.
Select All to allow any computer to access the G-1000 v2 using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the G-1000 v2 using this service.
Chapter 6 Remote Management Configuration