Telnet; Figure 25 Telnet Configuration On A Tcp/Ip Network - ZyXEL Communications Wireless-11g Access Point ZyXEL G-1000 v2 User Manual

Table 25 Remote Management: WWW
LABEL
Apply
Cancel

6.3 Telnet

You can configure your G-1000 v2 for remote Telnet access as shown next. The administrator
uses Telnet from a computer on a remote network to access the G-1000 v2.

Figure 25 Telnet Configuration on a TCP/IP Network

6.4 Configuring Telnet
Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.
Chapter 6 Remote Management Configuration
DESCRIPTION
Click Apply to save your settings back to the G-1000 v2.
Click Cancel to begin configuring this screen afresh.
ZyXEL G-1000 v2 User's Guide
69