Table of Contents
Advertisement
This chapter describes how to configure your G-1000 v2 to interact with the wired network.
5.1 Configuring IP
To configure Internet connection, click Network > IP > Internet Connection. The screen
appears as shown.
Figure 22 Network: Internet Connection
The following table describes the labels in this screen.
Table 23 Network: Internet Connection
LABEL
IP Address Assignment
Get
automatically
from
DHCP
Use fixed IP
address
Chapter 5 IP and DNS Screens
IP and DNS Screens
DESCRIPTION
Select this option if your G-1000 v2 is using a dynamically assigned IP address
from a DHCP server each time.
Note: If you change the IP address of your G-1000 v2 or if an IP
address is assigned to the G-1000 v2 automatically, you can
access the device by using the new IP address or typing
"http://zyxelXXXX" (where XXXX are the last four digits of your
device's MAC address) in your browser. The MAC address can
be found on the back label of your G-1000 v2.
Select this option if your G-1000 v2 is using a static IP address. When you select
this option, fill in the fields below.
ZyXEL G-1000 v2 User's Guide
C
H A P T E R
5
63
Advertisement
Table of Contents
Troubleshooting
