No Security - ZyXEL Communications WAP3205 User Manual

Chapter 5 Universal Repeater Mode
Note: To have wireless clients access or acquire an IP address from another access point
or wireless router (B) through the WAP3205 v2 (A) in universal repeater mode,
you must set the channel number in the Wireless LAN > General and Wireless
LAN > Universal Repeater screens to be the same as the one on the wireless
router or AP to which the WAP3205 v2 wants to connect.

5.7.1 No Security

Figure 21 Universal Repeater Mode: Wireless LAN > Universal Repeater: No Security
The following table describes the labels in this screen.
Table 16 Universal Repeater Mode: Wireless LAN > Universal Repeater: No Security
LABEL
Universal Repeater Parameters
Enable
SSID
MAC Address
(Optional)
Channel Selection
Security Mode
Apply
Cancel
38
A
DESCRIPTION
Select this option to have the WAP3205 v2 connect to the specified access point.
Enter the name of the access point to which you are connecting.
Enter the MAC address of the access point to which you are connecting.
Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box. The options vary depending on the
frequency band and the country you are in.
Select No Security if the access point to which you want to connect does not use
encryption.
Click Apply to save your changes back to the WAP3205 v2.
Click Cancel to reload the previous configuration for this screen.
B
WAP3205 v2 User's Guide