Canton Smart Sounddeck 100 Operating Instructions Manual page 49

Problem Possible cause
The input [BT] cannot 1. The function BT Select [BTS] is activated and
be selected via the the Sounddeck 100 switches the source auto-
"Input" buttons " " matically as soon as a signal from your (mobile)
or " ". device is received.
The Sounddeck 100 1. The function BT Select [BTS] is deactivated
does not automatically
(Manual / [MAN]).
switch to the input
2. Bluetooth
[BT].
vice.
3. The Sounddeck 100 is connected to
another (mobile) device.
4. The (mobile) device is not paired to the
Sounddeck 100.
No playback or inter- 1. There is no connection between the Sound-
rupted playback via
deck 100 and the (mobile) device.
Bluetooth wireless
®
2. The (mobile) device is paired,
technology.
but it does not play.
3. You are out of reach of the Sounddeck 100.
The maximal distance is approx. 10m.
® is disabled on your (mobile) de-
Solution
1. Deactivate the function BT Select [BTS] in order to select
the input [BT] manually.
1. Activate the function BT Select [BTS].
2. Activate Bluetooth ® technology on your (mobile) device.
3. Disable Bluetooth wireless technology on the other (mo-
®
bile) device.
4. Pair your (mobile) device with the Sounddeck 100.
1. Pair and connect your (mobile) device with the Sounddeck
100 as described in this manual.
2.1 The (mobile) device needs to be reconnected.
2.2 Increase the volume at the (mobile) device (to the
maximum possible value).
2.3 Increase the volume of the Sounddeck 100.
2.4 Make sure that sources of interference, such as a
WiFi Router or a laptop, are not placed in close proximity
to the Sounddeck 100.
2.5 Simultaneous operation via WiFi and Bluetooth
connection from a (mobile) device is not possible
without interference in some cases; therefore, disable
WiFi on the (mobile) device.
3. Reduce the distance between the Sounddeck 100
and the (mobile) device to below 10m.
English
®
3 4 9