Network Reset [Nwr]; Wireless Setup [Wis] - Canton Smart Sounddeck 100 Operating Instructions Manual

Confirm the first item Network Select [NWC] with the "OK" button.
3
Select the desired connection way using the "+" or "-" key, [WIF] for a wireless resp. [ETH] for a wired network connection and confirm
4
with the "OK" button.
Press the "M" button to exit this menu item.
5

Network Reset [NWR]

This function is to reset all network settings stored on the Sounddeck 100.
Caution: All settings you have made and stored on the Sounddeck's WiFi module will be deleted!
To perform the reset please do as follows:
Power up the Sounddeck 100 by pressing the Power button " " on the remote.
1
To enter the menu, press the "M" button.
2
Use the " " or " " button to navigate to the menu Network Setup [NWS] and confirm with the "OK" button.
3
Use the " " or " " button to select the funktion Network Reset [NWR] and confirm with the "OK" button. The menu shows the Net-
4
work Reset menu and "No" is selected, the display shows [NO].
If you want to cancel the reset precedure, press "OK", or press the menu key "M".
5
If you want to perform the reset, select "Reset all" using
6
The OSD shows "Please Wait", the display still shows [YES]. After the reset-process (ca. 30-40 seconds) the Sounddeck 100 goes back
7
into normal mode. The WiFi module reboots. During the starting process the LED flashes green rapidly.

4. Wireless Setup [WIS]

The fourth item of the Main Menu is the Wireless Setup which is used to set-up both the wireless speaker connection and the Bluetooth
reless technology. It contains the items:
• Wireless Pairing [WSP]
• Wireless Reset [WRE]
• Transmission Power [TXP]
• RF Channel [CHN]
" " or " " key and press "OK". The display shows [YES].
English
wi-
®
3 3 7