Language [LAN]
With this option you can change the On-Screen display (OSD) language from German to English and backwards.
To change the (menu)language please do as follows:
To enter the menu, press the "M" button on your remote control.
1
Use the " " or " " button to navigate to the menu System Setup [SYS] and confirm with the "OK" button.
2
Use the " " or " " button to select the menu item Language [LAN] and confirm with the "OK" button.
3
Select the wanted language English or German using the "+" or "-" key.
4
Then press "OK" again to leave the menu.
5
Playmode [PLM]
In this menu you can activate additional playmodes that can then be used and selected in addition to the 3 standard playmodes Stereo, Movie
and Music with the Play Mode button. These playmodes are:
• Discrete [DCT]:
Surround sound for movies, music, etc. without a virtualizer.
• Night [NGT]:
(Virtual) surround sound with reduced dynamic and higher voice clearity at low volume levels for "night usage".
• Party [PTY]:
Plays the front channels (L+R) additionally on the surround speakers.
To activate or deactivate an additional playmode please do as follows:
To enter the menu, press the "M" button.
1
Use the
" "
or " " button to navigate to the menu System Setup [SYS] and confirm with the "OK" button.
2
Use the
" "
or " " button to select the menu item Playmode [PLM] and confirm by pressing "OK".
3
Select the desired playmode by using the " " or " " button and press "OK".
4
Activate (ON / [ON]) resp. deactivate (OFF / [OFF]) the selected playmode with the "+" or "–" button and exit this playmode by
5
pressing "OK".
To activate or deactivate a different playmode please repeat the steps 4 and 5.
6
Press the "M" button to exit this menu item.
7
Note:
The playmodes Discrete and Party are only selectable if Smart (wireless-)speaker are connected to the Sounddeck 100.
You can find additional information in the description in the "Sub Out" and "Wireless Pairing" part.
English
3 3 5
Need help?
Do you have a question about the Smart Sounddeck 100 and is the answer not in the manual?
Questions and answers