Bt Select [Bts]; Bt Reset [Bre] - Canton Smart Sounddeck 100 Operating Instructions Manual

English

BT Select [BTS]

When this function is set to Auto [AUT], the Sounddeck 100 automatically switches to the BT input whenever it detects an audio signal
from the (mobile) device. If this function is deactivated and set to Manual [MAN] (factory default), the input must be selected manually.
To activate / deactivate this function please proceed as follows:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate to the menu Wireless Setup [WIS] and confirm with the "OK" button.
2
Use the " " or " " button to select the menu item Bluetooth [BT] and confirm with the "OK" button.
3
Use the " " or " " button to select the menu item BT Select [BTS] and confirm with the "OK" button.
4
Select the wanted parameter [MAN] resp. [AUT] using the "+" or "-" key.
5
Press the "M" button to exit this menu item.
6
Notes: • Depending on the (mobile) device used, with this function set to Auto [AUT] the Sounddeck may also switch to the BT input
when typing a message or when other system tones occur. A time delay of 5 seconds is programmed to avoid continuous
switching (e.g. on arrival of a message).
• If the BT Select function is activated [AUT], the BT input cannot be selected via the input buttons
• If the function "BT Select" is activated [AUT], the Sounddeck 100 can be paired with a (mobile) device at any time,
regardless of the selected signal input.

BT Reset [BRE]

This function is to reset all Bluetooth
Caution: ALL settings you have made and stored on the Sounddeck regarding the BT audio module will be deleted.
To perform the reset please proceed as follows:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate to the menu Wireless Setup [WIS] and confirm with the "OK" button.
2
Use the " " or " " button to select the menu item Bluetooth [BT] and confirm with the "OK" button.
3
Use the " " or " " button to select the menu item BT Reset [BRE] and confirm with the "OK" button.
4
The menu BT Reset is displayed and the status indication shows "No", the display shows [NO].
If you want to cancel the reset precedure, press "OK", or press the menu key "M".
5
If you want to perform the reset, select "Reset all" using
6
42
® wireless technology relating settings stored on the Smart Sounddeck 100.
" " or " " key and press "OK". The display shows [YES].
" " or " " any longer.