Playback Via Bluetooth® Wireless Technology - Canton Smart Sounddeck 100 Operating Instructions Manual

Playback via Bluetooth
For wireless audio streaming you can connect your (mobile) device with the Sounddeck 100 using Bluetooth® wireless technology.
Requirements:
• The Bluetooth® wireless technology must be activated on the (mobile) device
• The (mobile) device must support at least the Bluetooth® standard 2.0
• The (mobile) device must be within range of the Smart Sounddeck 100 (max. 10 m).
Pairing process
To pair or connect the two devices please do as follows:
Please select the input [BT] using the buttons Up ( ) or Down ( ) and then press the "Bluetooth Pairing" button on your remote. The
1
display shows [BTP].
Start the search function on your (mobile) device.
2
Select the Canton Smart Sounddeck 100 as the playback device.
3
If you have entered a specific name during the network setup (e.g. Living Room), this name will be listed as playback device.
Note:
Once confirmed, the connection will be made automatically and will appear as [BT-] and [CON] in the display.
4
If the (mobile) device requires an access code, please enter 0000.
5
If the connection fails the message [FAI] will appear. Please ensure the requirements (see above) are fullfied and repeat the pairing process.
6
If [BT-] and [DIS] appears in the display, your (mobile) device is out of range or logged out.
7
Operating a (mobile) device
The device most recently connected to the Sounddeck connects automatically when the Bluetooth® function is activated and the input
Bluetooth® has been selected. In this case the message [BT-] followed by [CON] appears. Start the playback of a medium on your (mobile)
device and the sound will be played back by the Smart Sounddeck 100.
wireless technology
®
English
3 1 9