Compression [Drc]; Audio [3D] - Canton Smart Sounddeck 100 Operating Instructions Manual

Hide thumbs Also See for Smart Sounddeck 100:
Table of Contents

Advertisement

English
To change the maximum volume, do the following:
To enter the Menu, press the "M" button.
1
Use the
" "
or " " button to navigate into the menu System Setup [SYS] and confirm with the "OK" button.
2
Use the
" "
or " " button to select the menu
3
Change the volume level values between 1 and 70 using the "+" or "-" key. Then press "OK", again.
4
To exit the menu, press the Menu button "M".
5

Compression [DRC]

Dynamic Range Control (DRC) is a setting option created by Dolby Laboratories. When activated, the dynamic range of encoded data
streams can be automatically reduced, which also reduces differences in volume. This makes it possible to enhance quiet tones and
suppress loud ones. By default this function is deactivated.
To change the setting, do the following:
To enter the menu, press the "M" button.
1
Use the
" "
or " " button to navigate into the menu System Setup [SYS] and confirm with the "OK" button.
2
Select the function Compression [DRC] and confirm with the "OK" button.
3
Select the wanted value using the "+" or "-" key:
4
[ON] means the DRC function is activated and the dynamic range is controlled by the meta data of the data stream.
[OFF] means the function is deactivated and the dynamic range will not be controlled.
Press the "M" button to exit this menu item.
5
3D Audio [3D]
With this option you can adjust the intensity of the virtualizer and the virtual Dolby Atmos
Starting from default setting Normal [NOR] you can increase the effect High [HIG] or decrease the effect Low [LOW].
To adjust the setting please do as follows:
To enter the menu, press the "M" button.
1
Use the
" "
or " " button to navigate to the menu System Setup [SYS] and confirm with the "OK" button.
2
Use the
" "
or " " button to select the menu item 3D Audio [3D] and confirm with the "OK" button.
3
Select the desired intensity using the "+" or "–" button as High [HIG], Normal [NOR] or Low [LOW] and confirm with pressing "OK".
4
Press the "M" button to exit this menu item.
5
34
item
Max Volume [VOL] and confirm with the "OK" button.
effect to your personal taste.
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Smart Sounddeck 100 and is the answer not in the manual?

Questions and answers

Table of Contents