Rear View - Steelcase Elective Elements Manual

®
INSTALL A MODESTY PANEL TO A PEDESTAL
1.
Remove drawers (if any) from pedestal.
2.
Drill (2) holes through pedestal back
panel in the locations shown.
3.
Install modesty panel onto bottom side
of worksurface.
A) Install (3) connecting bolts into holes in
the worksurface.
B) Lower modesty panel into position.
C) Insert (3) cam locks and secure with a
half turn.
3a
CONNECTING BOLT
2
Locate (2) holes
in stretchers in back
of pedestal as shown,
then drill through back
panel of pedestal.

REAR VIEW

3b
3b
To remove drawers
push lever down on one
side, and up on the other.
3c
1
Page 7 of 9
939500245 Rev E