Advertisement
®
1
Unpack and sort all components.
2
Position top upside down on the assembly surface.
3
Layout the left and right lift columns, lift the stretcher
into each dovetail, connect loosely. (Left and right is
determined when the table is standing on the base
and is viewed from the front.)
TOP VIEW
COLUMN
STRETCHER
RIGHT COLUMN
Worksurface Assembly
Note: A clean, abrasion free
surface will be necessary for
table assembly.
STRETCHER
DOVETAIL
LEFT COLUMN
4
Once each lift column has been engaged, lightly tap each
connection point with a rubber mallet 1/8-1/4 inch at a time, until
completely seated. Do not completely install one lift column at a
time...they must be installed incrementally.
STRETCHER
DOVETAIL
REAR VIEW
5
For each lift column, fold the electrical 'pig-tail' towards
the center of the surface. Secure in the notch
provided in each lift column.
ELECTRICAL
PIGTAIL
NOTCH
FLUSH
Page 2 of 20
005720D Rev F
Advertisement
