Steelcase Elective Elements Adjustable-Height Underworksurface Storage Manual

Download this manual

Two File Drawers

If you have a problem, question, or request, call

your local dealer, or Steelcase Line 1 at

888.STEELCASE (888.783.3522)

for immediate action by people who want to help you.

(Outside the U.S.A., Canada, Mexico, Puerto Rico,

and the U.S. Virgin Islands, call: 1.616.247.2500)

Or visit our website: www.steelcase.com

Grand Rapids, MI 49501

U.S.A.

Printed in U.S.A.

Two Box and One File Drawer

Steps for correct installation of

soft close drawers

Pull LH and RH suspensions to full extents

Find and disengage rear posts, LH and RH

Align drawer suspensions and install

Elective Elements - Adjustable-Height

Two High Lateral Files

NOTICE

Soft close mechanism

can be damaged if this

step is skipped.

RH post is

shown here

in yellow

Underworksurface Storage

Page 1 of 3

939500228 Rev F

Need help?

Do you have a question about the Elective Elements Adjustable-Height Underworksurface Storage and is the answer not in the manual?

Page 1 Two High Lateral Files NOTICE If you have a problem, question, or request, call Steps for correct installation of your local dealer, or Steelcase Line 1 at Soft close mechanism soft close drawers can be damaged if this step is skipped.
Page 2 Unlock (1a) and remove drawers from cabinet (1b). Remove finished top by removing (4) screws through sub-top and (2) screws from each corner bracket, then lift top out. Loosen screws on straps. Raise adjustable-height brackets to desired height, then retighten screws. Remove protective tape from decorative covers at top of adjustable-height brackets.
Page 3 Move cabinet into position. Secure worksurface to adjustable-height brackets with (4) screws through each bracket. Use a 5/32" Allen Wrench to adjustlocking mechanism. Rotate camclockwise for Reinstall finished top onto cabinet. upward movement, counter- clockwise to move down. Reinstall drawers into cabinet. a) Push drawer rails back into pedestal.