Steelcase Elective Elements Blade Accessory Shelf Manual

Elective Elements - Blade Accessory Shelf

TUBE

ACCESSORY SHELF

Phillips with Magnetic Bit

If you have a problem, question, or request, call

your local dealer, or Steelcase Line 1 at

888.STEELCASE (888.783.3522)

for immediate action by people who want to help you.

(Outside the U.S.A., Canada, Mexico, Puerto Rico,

and the U.S. Virgin Islands, call: 1.616.247.2500)

Or visit our website: www.steelcase.com

Grand Rapids, MI 49501

Page 1 of 3

U.S.A.

939568003 Rev A

Printed in U.S.A.

Table of Contents

Need help?

Do you have a question about the Elective Elements Blade Accessory Shelf and is the answer not in the manual?

Page 1 ACCESSORY SHELF Phillips with Magnetic Bit If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.3522) for immediate action by people who want to help you. (Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S.
Page 2 Refer to assembly direction 939500232 for information to assemble a one-sided hutch. BOTTOM PANEL Carefully turn cabinet over with OF CABINET bottom side up onto carpet or other clean, soft material. Attach tube flush with back panel as shown. Note: If hutch is two-sided or wall mounted, center tube side to side.
Page 3 #10-24 x .750" Flat Head Screws (fill all holes) Position shelf so that sets of (2) holes in shelf are aligned with holes in frame. Secure with screws provided. Carefully turn assembly over and place into position. Note: if the unit will be against a window, you may want to place felt between the shelf, the TIP: Place a shim under shelf to help tube, and the cabinet.