Weighing With Tolerance Range - KERN EOC Series Operating Manual

Press and the current setting for the acoustic signal
will be shown.
Select desired setting (no, ok, ng) by
Confirm input by
Press ; weighing system is in tolerance weighing
mode. From here evaluation takes place whether the load
is within the two tolerance limits.

Weighing with tolerance range:

Tare when using a weighing container.
Put on load, tolerance control is started. The symbols
show whether the load is within the two
tolerance limits.
Load below specified
tolerance
• The tolerance control is not active when the weight is under 20d.
• To delete limits, enter "00.000 kg".
EOC-BA-e-1610
.
.
Load within specified
tolerance
Load exceeds specified
tolerance
31