Simple Weighing - KERN EOC Series Operating Manual

7.5 Simple weighing

Place load – Wait for stability display
Overload warning
Overloading exceeding the stated maximum load (max) of the device, minus a
possibly existing tare load, must be strictly avoided. This could damage the
instrument.
Exceeding the maximum load is indicated by the display
and an audio sound. Unload weighing system or reduce preload.
7.6 Switch-over weighing unit
Enable weighing unit:
Call-up menu item „P5 Unt", see chap. 8.2
Press and the first weighing unit with the current
setting will be displayed.
Use to enable (on) or to disable (oFF) the
displayed unit.
Acknowledge with
automatically to the next unit.
Use to enable (on) or to disable (oFF) the
displayed unit.
Repeat sequence for each weighing unit.
Return to weighing mode using
EOC-BA-e-1610
– Read-off weighing result.
. The display change
27