Parameters When Weighing With A Tolerance Range (Excl. Model Kern Ew120-4Nm) - KERN EW-N Series Operating Instruction

7.2.1 Parameters when weighing with a tolerance range
(excl. model KERN EW120-4NM)
Settings 21. Co. to 23. P
has been activated.
Function
Display conditions of
the tolerance mark
Tolerance range
Setting the tolerance
mark
EW/EG-N-e-1728
. can only be set if the tolerance weighing function
I
Display Choice
21. Co. ☆ 1
2
22. L . 0
I
☆ 1
23. P . 1
I
☆ 2
Description of the choice
possibilities
Tolerance mark is always dis-
played, even if standstill check not
yet indicated.
Tolerance mark only displayed in
connection with standstill check.
Tolerance mark only displayed
above the zero point range (at
least + 5).
Tolerance mark displayed
throughout entire range.
1 tolerance step is displayed:
"-" or "+"
2 tolerance steps are displayed:
"- " and "+"
49