Assembly instructions Tripod Contents Technical data ......................2 Scope of delivery ....................3 Assembly EOB-A01 ....................3 Assemble the tripod to the balance ................. 3 Assemble the display unit to the tripod ................4 Assembly EOB-A01N ....................4 Assemble the tripod to the balance ................. 4 Assemble the display unit to the tripod ................
3. Turning knobs for assembly display unit 4. Support screw (already assembled) Support screw 5. Rubber cover 3 Assembly EOB-A01 3.1 Assemble the tripod to the balance Example: Fasten the tripod acc. to illustration with the 4 screws on the lower side of the platform.
4.1 Assemble the tripod to the balance Fasten the tripod acc. to illustration with the 4 screws on the lower side of the platform. Observe that during screwing down not too much pressure is performed on the weighing pan. EOB-A01-A01N-IA-e-1310...
4.2 Assemble the display unit to the tripod Secure the display unit with the two black rotary knobs to the tripod according to illustration. Position display unit with the rotary knobs. EOB-A01-A01N-IA-e-1310...