KERN EOB/EOE/EOS/BOBP Version 2.0 11/2006 Operation instructions Platform/floor scales Tabel of contents: Technical data ....................4 Declaration of conformty ................10 Appliance Overview ..................11 Fundamental information (general) ............... 13 Intended use ......................13 Inappropriate use ....................13 Guarantee ......................13 Monitoring the test substances................14 Fundamental safety information ..............
Page 3
Plus / Minus Weighings..................20 Weight units ......................20 Maintenance, upkeep, disposal..............21 Cleaning ........................21 Maintenance, upkeep ...................21 Disposal.........................21 Troubleshooting................... 22 EOB/EOE/EOB/EOS/BOBP-BA-e-0620...
310 x 300 x 55 (platform) 310 x 300 x 55 (platform) Size (W x D x H) mm 210 x 110 x 45 (terminal) 210 x 110 x 45 (terminal) Weighing plate mm 310 x 300 Weight kg (net) EOB/EOE/EOS/BOBP-BA-e-0620...
Page 5
210 x 110 x 45 210 x 110 x 45 210 x 110 x 45 210 x 110 x 45 Stainless steel 550 x 550 310 x 300 550 x 550 945 x 505 weighing plate (mm) Weight kg (net) 22,0 EOB/EOE/EOB/EOS/BOBP-BA-e-0620...
Page 6
Size (W x D x H) mm erminal: erminal: erminal: 210 x 110 x 45 210 x 110 x 45 210 x 110 x 45 Stainless steel 310 x 300 550 x 550 945 x 505 weighing plate (mm) Weight kg (net) 22,0 EOB/EOE/EOS/BOBP-BA-e-0620...
Page 7
210 x 110 x 45 210 x 110 x 45 210 x 110 x 45 210 x 110 x 45 Weighing platform, 505 x 505 945 x 505 505 x 505 945 x 505 lacquered ( mm) Weight kg (net) 22,0 22,0 EOB/EOE/EOB/EOS/BOBP-BA-e-0620...
Page 8
Humidity max. 80 % (non-condensing) 900 x 550 x 65 (plattform) Size (W x D x H) mm 210 x 110 x 45 (terminal) Stainless steel 900 x 550 x 65 weighing plate (mm) Weight kg (net) 22,5 EOB/EOE/EOS/BOBP-BA-e-0620...
Page 9
+ 5° C ..+ 35° C operation Humidity max. 80 % (nicht kondensierend) 1000 x 1000 x 90 (Plattform) Size (W x D x H) mm 210 x 110 x 45 (Terminal) Weighing plate mm 1000 x 1000 x 90 Weight kg (net) 50,5 EOB/EOE/EOB/EOS/BOBP-BA-e-0620...
Manifestamos en la presente que el producto al que se refiere esta declaración est´´a de acuerdo con las normas siguientes Dichiariamo con ciò che il prodotto al quale la presente dichiarazione si riferisce è confor- Italiano me alle norme di seguito citate. Platform Scale: KERN EOB/EOE/EOS/BOBP Mark applied EU Directive Standards 89/336EEC EMC...
- use outside the described applications - alteration to or opening of the device - mechanical damage and damage caused by media, liquids - natural wear and tear - inappropriate erection or electric installation - overloading of the measuring equipment EOB/EOE/EOB/EOS/BOBP-BA-e-0620...
Please retain all parts of the original packaging in case it should be necessary to re- turn items at any time. Only the original packaging should be used for return consignments. Before despatch, disconnect all attached cables and loose/movable parts. EOB/EOE/EOS/BOBP-BA-e-0620...
Avoid static charging of the material to be weighed, weighing container and windshield. Major display deviations (incorrect weighing results) are possible if electromagnetic fields occur as well as due to static charging and instable power supply. It is then ne- cessary to change the location. EOB/EOE/EOB/EOS/BOBP-BA-e-0620...
Carefully remove the balance from the packaging and out of the plastic covering, then place the balance on the assigned position. 7.2.2 Package volume Serial fittings: KERN EOB • Platform (stainless steel weighing plate) and display device • 4 x Adjusting feet (except platform 310 x 300) • Mains device •...
When the battery power is used up the display will show “LO“. Press the OFF key and change the batteries at once. When the balance is not in use for a longer period of time remove batteries and keep them separately. Leakage of battery liquid might damage the balance. EOB/EOE/EOB/EOS/BOBP-BA-e-0620...
Place the adjusting weight in the centre of the weighing plate. Press UNIT key. The value of the size of the adjusting weight will stabilise a short time later. Keep the adjusting weight next to the balance. A daily balance accuracy check is recommended for applications relevant to quality. EOB/EOE/EOS/BOBP-BA-e-0620...
The taring procedure can be repeated continuously, for instance when mixing several components. The limit is reached when the full weighing range is overlaid. After having removed the jiffy the total weight will appear as a minus indication. EOB/EOE/EOB/EOS/BOBP-BA-e-0620...
8.5 Weight units Two units are available: “kg“ and “lb“. The weight unit is chosen by pressing the ”Unit” key. A lamp to the right of the display signalises the respective unit. Unit conversion: 1 kg = 2.20462 lb EOB/EOE/EOS/BOBP-BA-e-0620...
The device may only be opened by trained service engineers authorised by KERN. Disconnect from the mains supply before opening. 9.3 Disposal The operating company shall dispose of the packaging and the device in compliance with the valid national or regional law of the operating location. EOB/EOE/EOB/EOS/BOBP-BA-e-0620...
• Electromagnetic fields / static charging (choose different location/switch off inter- fering device if possible) Switch the balance off if other error messages should appear and then switch on again. Contact the manufacturer if the error message does not disappear. EOB/EOE/EOS/BOBP-BA-e-0620...