Weighing With Tolerance Range - KERN GAB-N Series Operating Instructions Manual

Settings:
 Unload scales and set to zero
0.0
GROSS
ZERO
HI 000.0
GROSS
 Press
ZERO
HI 0.500
 Enter upper limit by pressing
GROSS
ZERO
(Example)
000.0
 Confirm upper limit by pressing
GROSS
ZERO
LO

 Enter lower limit by pressing
 Confirm lower limit by pressing
(Example)

0.0
GROSS
ZERO
 To reset the enter value to zero, press

Weighing with tolerance range

 Tare when using a weighing container
 Put on goods to be weighed, tolerance control is started
 The tolerance control is not active when the weight is under
 To finish tolerance weighing, set both limit to zero by pressing
GAB-N-BA-e-1817
TOL
The left digit will be flashing and icon HI will be displayed
The weighing scales will change to the prompt for entering
the lower limit.
The scales will change to zero display.
20d.
F
.
C
TOL
TARE
and .
0
.
TOL TARE
and .
0
.
F
.
C
27