This chapter shows you how to use the ZyXEL utility to configure your G-120 in wireless
station mode. See
4.1 Wireless Station Mode Overview
To set your G-120 to wireless station mode, select Station Mode in any utility screen (refer to
Section 1.2.3 on page
4.1.1 ZyXEL Utility Screen Summary
This section describes the ZyXEL utility screens when the G-120 is in station mode.
Figure 21 ZyXEL Utility Menu Summary: Station Mode
The following table describes the menus.
Table 2 ZyXEL Utility Menu Summary: Station Mode
TAB
Station Mode
Link Info
Site Survey
Profile
Adapter
4.2 The Link Info Screen
When the ZyXEL utility starts, the Link Info screen displays, showing the current
configuration and connection status of your G-120.
Chapter 4 Wireless Station Mode Configuration
Wireless Station Mode
Chapter 5 on page 61
for how to configure the G-120 in access point mode.
23).
DESCRIPTION
Use this screen to see your current connection status, configuration and data rate
statistics.
Use this screen to
•
scan for a wireless network
•
configure wireless security (if activated on the selected network).
•
connect to a wireless network.
Use this screen to add, delete, edit or activate a profile with a set of wireless and
security settings.
Use this screen to configure a transfer rate, enable power saving and use OTIST
(One-Touch Intelligent Security Technology).
ZyXEL G-120 User's Guide
C
H A P T E R
Configuration
4
43