Panel (Rear) Assy Block - Sony NWZ-S754 Service Manual

NWZ-S754/S755
Note: Follow the disassembly procedure in the numerical order given.
2-2.

PANEL (REAR) ASSY BLOCK

1 two screws
(M1.4 5.5)
– Rear side view (bottom side) –
Left side:
front panel block
panel (rear) assy block
2 Insert your nail in the gap between front
panel block and panel (rear) assy block.
Then slide it to arrow direction to remove
claws of panel (rear) assy block.
front panel block
4
10
3 six claws
5 two claws
switch
support (hold)
Right side: front panel block
panel (rear) assy block
2 Insert your nail in the gap between front
panel block and panel (rear) assy block.
Then slide it to arrow direction to remove
claws of panel (rear) assy block.
6 panel (rear) assy block
Note: When installing panel (rear) assy
block, the position of switch and
support (hold) is set and installed.