Restore Configuration; Figure 156 Configuration Upload Successful; Figure 157 Temporarily Disconnected; Table 123 Maintenance > Tools > Configuration > Restore - ZyXEL Communications V501-T1 User Manual

Chapter 16 Tools

16.3.2 Restore Configuration

Restore configuration allows you to upload a new or previously saved configuration file from
your computer to your V500.
Table 123 Maintenance > Tools > Configuration > Restore
LABEL
Restore
Configuration
File Path
Browse...
Upload
Do not turn off the V500 while configuration file upload is in progress
After you see a "configuration upload successful" screen, you must then wait one minute
before logging into the V500 again.

Figure 156 Configuration Upload Successful

The V500 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.

Figure 157 Temporarily Disconnected

If you uploaded a configuration file that sets the V500 to get an IP address automatically, use
the System Info > IP Address > IP Address LCD menu to find out its new address. See
Section 6.3.2 on page 79
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.
224
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse... to find
it.
Click Browse... to find the file you want to upload. Remember that you must
decompress compressed (.ZIP) files before you can upload them.
Click Upload to begin the upload process.
for more information.
V500 Series User's Guide