Initial Configuration - ZyXEL Communications V-630 Quick Start Manual

5 Initial Configuration

VoIP (Voice over IP) allows you to make phone calls over the
Internet. SIP is the protocol the V630 uses to make VoIP
calls. Before you configure the V630, you need:
• An active account with a VoIP service provider that uses SIP.
• A wireless LAN (IEEE 802.11b or IEEE 802.11g) connection.
See Section
5.1 Entering Your VoIP Account
Do the following to set the V630 to use your VoIP account.
1 From the V630's main screen, press the Left key (Menu)
to enter the menus.
2 Use the Down key to go to 4
Network and then the Left key to
select it.
3 Select 3 SIP Profiles.
ENGLISH
6 for more information.
9
--------Main Menu--------
1 Call log
2 Profiles
3 Setup
4 Network
Select
----------Network----------
1 Site Scan
2 WLAN Profiles
3 SIP Profiles
4 Ping Test
Select
Back
Back