7.3.2.4.1 First / Second DNS - Edit
Press Edit in the 1st DNS or 2nd DNS screen. A screen similar to the following displays (this
example uses the 1st DNS screen).
Figure 67 LCD Menu: First / Second DNS - Edit
1st DNS
Current: 0.0.0.0
New:
Save
The following table describes the labels in this screen.
Table 45 LCD Menu: First / Second DNS - Edit
LABEL
Current
New
Mode
Save
.
<-
Cancel
7.3.3 DHCP
Use DHCP to have the V500 get an IP address automatically from a DHCP server on the
network.
Select Advanced Setting > Network Settings. In the screen that displays, ensure that DHCP
is enabled.
DHCP is enabled by default.
V500 Series User's Guide
.
<-
DESCRIPTION
This is the subnet mask your V500 is configured to use.
Enter the DNS server's IP address in dotted decimal notation.
Cycle through different character input modes using the # key.
Press this to save your changes.
Press this to enter a period.
Press this to delete a character.
Press this to return to the previous screen without saving your settings.
Chapter 7 LCD Menus: Advanced
Number
Cancel
115