Pbx Mode; Figure 121 Lcd Menu: Call Feature Mode; Table 96 Lcd Menu: Contrast - ZyXEL Communications V501-T1 User Manual

Chapter 7 LCD Menus: Advanced

7.8.1 PBX Mode

Use this menu to configure the PBX mode settings. PBX mode should be selected if your
phone connection is routed through a ZyXEL IP PBX (such as the X2002), or another IP-PBX.
The settings here are automatically configured using auto-provisioning if routed through a
ZyXEL device; otherwise, you may have to configure these settings manually.

Figure 121 LCD Menu: Call Feature Mode

Call Feature Mode
CallTRF:
DNDOff:
DNDOn:
Paging:
Voicemail:
Apply
The following table describes the labels in this screen.

Table 96 LCD Menu: Contrast

LABEL
CallTRF
DNDOff
DNDOn
Paging
Voicemail
Apply
*
<-
Back
156
* <-
DESCRIPTION
Enter the feature code key for call transfer mode.
Enter the feature code key that turns Do Not Disturb off.
Enter the feature code key that turns Do Not Disturb On
Enter a list of paging numbers, separated by commas. You can enter up to
a maximum of 127 digits and characters.
Enter the feature code you used to access your voicemail from this phone.
Press this to save your settings.
Enter an asterisk in a Key line.
Press this to delete a character.
Press this to return to the previous screen.
Back
V500 Series User's Guide