Configuring Voip Options Manually - ZyXEL Communications V501-T1 User Manual

Chapter 3 Tutorials

3.3.1 Configuring VoIP Options Manually

If your phone network does not use or support automatic configuration through auto
provisioning, then you must configure the V500's voice server settings yourself.
The essential settings you need to establish a VoIP connection are:
SETTING
Display Name
SIP Number
SIP Server Address
SIP Register Server
SIP Authentication ID
SIP Authentication
Password
To configure your VoIP settings:
1 Open the
available account slots. (You may be prompted to enter the administrator password. The
default is "1234".)
SIP Configuration
1 VoIP 1 Config. (On)
2 VoIP 2 Config. (Off)
3 VoIP 3 Config. (Off)
4 VoIP 4 Config. (Off)
Select
48
TUTORIAL VALUE
Michael
1001
172.23.10.10
172.23.10.10
mscott
Customization
1234
> Advanced > SIP Configuration screen and select one of four
MENU
On Off
NOTES
This is your name as it will appear on the
V500's LCD screen and which is associated
with this phone extension and SIP server
information. Other users receiving calls
placed by you may also see this name on
their own devices, depending on your
particular SIP server.
This is your IP phone number or extension.
Not all network admins or service providers
necessarily use the same term for it; for
example, some admins may instead call it the
VoIP number.
This is the IP address of the SIP server that
the V500 uses to communicate with other
phones and devices.
This is the service registration server's IP
address. Usually, this value is identical to the
SIP Server Address. Even though it is the
same, it is still required.
This is the SIP login ID that is associated with
this phone. It must provided for
authentication.
This is the SIP login password that is
associated with this phone. It must provided
for authentication.
Back
V500 Series User's Guide