Dhcp - ZyXEL Communications P2000W User Manual

P-2000W_V2 User's Guide
5 Use the left arrow button to clear the IP address. Use the up and
down arrows to select the type of characters. Enter your IP
address. Use the Left key to select Ok when you are done.
6 Select Subnet Mask.
7 Clear the subnet mask and enter your's.The subnet mask
specifies the network number portion of an IP address. Type the
subnet mask given to you by your network administrator. See
the appendix for information on subnetting.
8 Select Gateway.
9 Clear the gateway IP address and enter your's.

4.2 DHCP

If you were not assigned a specific IP address for your Prestige, use the following directions to
set your Prestige to get it automatically via DHCP (Dynamic Host Control Protocol).
1 Select Net Settings in the first menu screen (use the up or down
arrow to highlight it and then press the Left key).
42
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195
IP Address
192.168.1.3
Ok Aa1@ Clear
3. Subnet Mask
4. Gateway
1. Network Mode
Select Back
Subnet Mask
255.255.255.0
Ok Aa1@ Clear
4. Gateway
1. Network Mode
2. IP Address
Select Back
Gateway
192.168.1.1
Ok Aa1@ Clear
4. Net Settings
5. SIP Settings
6. Settings
Select Back
Chapter 4 Network Settings
Fax: +44 (0)1245 600030