Door And Door Trims Installation - Fisher & Paykel ACTIVESMART RS36A80 Installation Manual

Internal box Attach the covers
If applicable, remove any remaining protective
1
Door / d rawer
C
film on your door panels.
trim install kit
Open both doors. Attach the top covers (A)
2
firmly over the top studs, and the side covers
(B) to the side brackets.
Dual adhesive tabs
(10)
Side cover
(4)
Top cover
(2)
External box
Attach the door side trims
Install the side trims by inserting into the panel gaps on each side of the
3
door(s) (C). Align the trim to the top of the door and press evenly into the
Door side trim
panel gap until fully seated (D).
(2)
Drawer side trim
(2)
C
Drawer top trim
(1)

DOOR AND DOOR TRIMS INSTALLATION

A
B
D
Attach the drawer top and side trims
Peel off two dual adhesive tabs and press them
4
together to form a pair (E). Remove the adhesive
backing on one side only.
Press firmly to the underside of the drawer top trim
5
in the indicated locations (F).
E
Remove the remaining adhesive backing from the dual adhesive tabs.
4
Locate the trim against the back surface of the panel and press down
5
firmly. Ensure the trim is fully seated against the drawer surface (G).
Install the side trims by inserting into the panel gaps on each side of the
6
door(s) (H).
– Make sure the cabinet is centered to prevent the side trims from
interfering with the cabinet.
G
H
F
37