B C
115° DOOR OPENING
(FULL INTERNAL ACCESS)
DIMENSIONS
Depth of door (widest opening) measured from front of door
A
Depth of drawer (open) measured from front of drawer, including handle
B
Depth of drawer (open) measured from front of drawer, excluding handle
C
Minimum door clearance* to adjacent wall
D
Minimum door clearance* to adjacent wall
E
*
Measured from front cabinetry edge. An additional 3/4" (20mm) is required when using RD3680 and RD3684 door panel sets.
12
DOOR CLEARANCE
D
B C
A
Wall
—
(115°
full internal access)
—
(90°
reduced internal access)
E
A
Wall
90° DOOR OPENING
inches
18 7/8
15 3/4
14 3/16
12 3/8
4 5/16
Insert hinge limiting pin
WARNING!
Before opening the doors, ensure that the appliance is
●
stable.
Follow these steps to avoid risks that can cause serious
●
injury or death.
For 90° door swing, a hinge limiting pin is supplied with
your appliance. This pin fits in the boreholes of the top hinge.
Open door to 90°.
1
Insert the hinge limiting pin vertically into the bore hole.
2
– Apply a gentle tap to the pin if it does not slide smoothly.
mm
480
400
360
315
110