Positioning Into Cabinetry - Fisher & Paykel ACTIVESMART RS36A80 Installation Manual

IMPORTANT!
Ensure the hose is not run over by the appliance when pushing into the cabinetry to prevent damage and possible water leaks.
●
Position the appliance into the cabinetry
Coil the excess water hose and power cord flat behind the appliance (A).
1
Push the appliance into the cabinetry until the anti-tip bracket overlaps the
2
rear top edge of the appliance (B).
IMPORTANT!
Ensure the appliance is centered.
●
Ensure the anti-tip bracket overlaps the refrigerator by a minimum 2 3/8"
●
(60mm) for a secure hold (C).
2 3/8" (60mm) min.
overlap
Refer to 'Attach anti-tip bracket' for more information.

POSITIONING INTO CABINETRY

C
Anti-tip
bracket
A
21