Before Installation - Fisher & Paykel ACTIVESMART RS36A80 Installation Manual

Integrated french door refrigerator freezer
Hide thumbs Also See for ACTIVESMART RS36A80:
Table of Contents

Advertisement

IMPORTANT!
IMPORTANT!
Be careful when unpacking to prevent damage to the surface of your appliance.
Ensure that the appliance is stable to prevent from tipping over when unpacking.
Do not open the doors to prevent the appliance from tipping over.
The appliance is heavy and requires a minimum of 2 persons to unpack and install.
Checking your appliance
Remove accessories box
1
located at the back panel
of appliance.
Refer to 'Components list' for
contents of accessories box.
IMPORTANT!
Be aware when removing the
carton that the accessories
box may have dislodged from
the rear of the appliance
during transit.
Remove the water fittings and
2
water filter kits, installation kit,
and miscellaneous items pack
from inside the appliance.
Refer to 'Components list'.
Water fittings and Water filter kits
Installation kit
ACTIVESMART™
INTEGRATED REFRIGERATOR
RS90A, RS9120W,
RS36A72, RS36A80 & RS36W80 models
USER GUIDE
NZ AU GB IE HK SG IN US
Miscellaneous items pack

BEFORE INSTALLATION

Ensure that the feet of the appliance are retracted.
If the appliance is damaged, contact your Fisher & Paykel dealer.
Take note of your model and registration numbers located at the lower right side of
the appliance. You will need these to request for servicing or repair of your appliance.
Moving your appliance
Remove the brackets from one side of the
1
appliance. (For single door models, remove
the brackets on the non-hinged side of the
appliance).
Note: Location of brackets depends on the
model of your appliance.
Restrain the appliance
4
to the cart with straps.
Remove the brackets
5
on the other side of
the appliance.
Tilt the appliance
Insert the hand truck under
2
3
slightly to the
the side of the appliance
opposite side.
where the brackets were
removed.
Do NOT insert the hand
truck to the front or back
of the appliance.
hand truck
Tilt the appliance backward
6
onto the cart.
Set aside the pallet and
7
push the cart to the
installation location.
15

Advertisement

Table of Contents
loading

Table of Contents