Fisher & Paykel ACTIVESMART RS36A80 Installation Manual page 32

Internal box Remove hanging brackets
Door panel
Remove the M8 washers and M8 nuts
B
1
attachment kit
from the M8 studs at the top the door (A).
Keep the washers and nuts to reuse later.
Remove the hanging bracket from the top of
2
each door and set aside (B) for later installation.
Side bracket
(10)
Side strap
(10)
#8x16 mush washer
(Custom) screw (36)
Door handle kit
M5x25 pan head socket
screw (12x)
#8 x 16
Mush Washer
Twin Thread
Philips Screw
Tools
Hex key
FPA spanner
Powered driver (optional)
30
DOOR PANEL INSTALLATION CUSTOM
A
B
Attach the door and drawer handles (C)
Align the handle holes with the door panel
3
holes and secure with M5x25 pan head
socket screws (4 per each door panel).
Note: Door handle kit available and
must be purchased separately.
Refer to 'Components' for more details.
Attach the hanging brackets (D)
Align the bracket to the holes
4
and secure with #8x16 mush
washer screw (14).
Attach side brackets and straps (E)
Align the brackets and straps to the holes
5
on the side of the panel and secure with
#8x16 mush washer screw (20).
E
C
C
D
D