Cabinet Trims Installation - [B] Fixed Screw Method - Fisher & Paykel ACTIVESMART RS36A80 Installation Manual

Internal box
Break off the datum lip to each side trim bracket and discard.
1
Repeat for all side trim brackets.
Cabinet side
D
trim install kit
Side trim bracket
(6)
#8x16 mush washer screw
(12)
External box
Cabinet side trim
#8 x 16
Mush Washer
(2)
Twin Thread
Philips Screw
For 80" (2032mm) cavity
installation only
Tools
Measure 4" (102mm) from the top
2
of the side trim with a square ruler
and mark a cutting line (A).
Cut along the line using a fine
3
tooth hacksaw to a length of
Hacksaw 76" (1930mm) (B).
IMPORTANT!
Ensure the cut is straight and square
●
as this is an exposed surface.
Cross-head screwdriver
Ensure the plastic part does not
●
bend as this can cause visual
stress marks.
Repeat for the remaining side trim.
Pencil
40
CABINET TRIMS INSTALLATION — [B] FIXED SCREW METHOD
Discard
A
Aluminum
Position three side trim brackets on one side trim.
4
Refer to (B) for bracket locations.
Open the French doors. Measure 2" (50mm) from the front
5
of cabinet (from behind the doors), to the front of the alcove
and accurately mark a vertical line (C).
Align the bracket edge with the marked line and fix the
6
bracket to the cabinetry with #8x16 mush washer screws (D).
Repeat on the opposite side.
IMPORTANT!
Inaccurate positioning of bracket can result in inability to
fit side trim or gaps between side trim and refrigerator.
~ 69" (1753mm)
B
Plastic
~ 40" (1016mm)
short lip
~ 10" (254mm)
2" (50mm)
B
Front of
cabinet
C
0
D