Fisher & Paykel ACTIVESMART RS36A80 Installation Manual page 27

Tools Attach the door panels
Open the door and loosen the M5x10 cross-head screws
1
(do not remove) at the sides of the doors (A).
Hang the door panel by inserting the M8 studs
2
through the holes of the hanging bracket (B).
FPA spanner
Slide the forks of the side brackets onto the
3
screws of the door (C).
Screw the M8 washer and nut to each stud (D),
4
and re-tighten the side screws (E) to fix the
door panel (do not fully tighten). This will allow
Hex key
opening the door without affecting adjustment
of the door panel.
Cross-head screwdriver
Powered driver (optional)
DOOR PANEL INSTALLATION - STAINLESS STEEL
A
E
C
B
D
25