Table of Contents
Advertisement
Please follow the installation steps below to ensure your appliance operates correctly.
Before installation
Power
Install your appliance where the plug is easily accessible.
Connect your refrigerator to a separate power point. Avoid sharing the power point with
other appliances. Do not use extension cords and double adaptors as the combined
weight of two power cords can pull the double adaptor from the power outlet.
For power requirements, refer to the information on the serial plate located at the front
bottom right-hand side of the refrigerator when the door is open.
Ensure your appliance is properly grounded (earthed).
Connect the appliance to the electrical supply (220V – 240V 50Hz) with the
fitted plug and lead.
Connections to the mains supply should be in accordance with local regulations.
Ice & Water models
Your Ice & Water refrigerator must be installed by a qualified plumber or Fisher & Paykel
trained and supported service technician as incorrect plumbing can lead to water leaks.
Fisher & Paykel Appliances does not accept responsibility for damage (including water
damage) caused by faulty installation or plumbing.
BEFORE INSTALLATION
9
Advertisement
Table of Contents
