Using The Blender - eta Vital Blend MINI Instructions For Use Manual

GB
Putting the container (B) on the driver unit (A)
Put the container B on the driver unit A according to Fig. 1. Apply the reverse procedure to
remove the container.
There are four positions for proper attachment of the container B onto the propulsion
IV. USING THE BLENDER
Clean and wash the ingredients before processing, or slice them into smaller pieces. Put
all ingredients in the container and put on the lid with cap. Put the closed container with the
ingredients on the driver unit.
The blender is intended for preparation of juices, milk cocktails, smoothies, sauces,
ice-cream, soups, baby food, diet food, purées, etc.
– If you process big amounts of food, divide them in separate portions so that you do not
overload the motor unit.
– Soak hard ingredients in water before processing (e.g. legume, soy beans etc.).
– Minimum quantity of 500g is necessary when processing nuts or making butter. Nuts
must be kept within the knife working area by pushing them by stamper during the
chopping process.
– Never remove the cover C when the unit is operating.
– When the appliance is in operation, it is only possible to add liquid ingredients
(e.g. water, milk, oil, etc.).
– Never use the pusher D individually without the lid C.
– The longer you process the ingredients in the blender, the finer the result will be.
– You can also process hot liquids up to temperature of 80 °C, e.g. sauces, soups.
– Never fill the container with liquids which make foam (e.g. milk) up to 2000 so that they
do not overflow. In this case we recommend amounts approx. 1250 ml.
– If you are not satisfied with the result, turn the appliance off, stir the ingredients using
the spatula, remove part of the ingredients or add some liquid.
– Times of preparation (processing) depend on amount, kind and quality of substances
used, normally they are in tens of seconds.
RECOMMENDED SPEEDS FOR PROCESSING INGREDIENTS
This is a high-speed blender. The revolutions are within the range of 15000-28000 RPM.
The speed can be regulated smoothly within the MIN - MAX range or you can use the
pulse function (the button for maximum revolutions A2). Always set the speed with regard
to the kind and amount of ingredients being processed, and particularly with regard to
ripeness of fruit and vegetables. We recommend that you always switch on the blender to
minimum revolutions and then gradually increase the performance as required.
When processing frozen food, always apply the maximum speed even when you are
switching the appliance on for the first time.
Note
unit A.
Recommendation
28 / 53