Freemotion i10.9b INCLINE TRAINER User Manual page 31

7. Center the Walking Belt (18), if necessary (see
pages 33 and 34). Then, plug in the power cord,
step onto the foot rails, insert the key into the con-
sole, and press the Start button. Hold the handrails
and gently press one foot against the moving walk-
ing belt. If the Walking Belt stops moving, remove
the key from the console, unplug the power
cord, and turn both roller adjustment screws clock-
wise one turn. Continue to test the tension of the
walking belt until the walking belt no longer slips.
Make sure to keep the walking belt centered.
7
18
31
LUBRICATING THE WALKING BELT
Your incline trainer features a walking belt coated
with high-performance lubricant. If the underside
of the walking belt is dry, you may need to apply
more lubricant (see the back cover of this manual).
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form unless instructed to do so by an authorized
service representative.