How To Move The Incline Trainer - Freemotion i10.9b INCLINE TRAINER User Manual

HOW TO MOVE THE INCLINE TRAINER

Before moving the incline trainer, unplug the
power cord. Note: It may be necessary to discon-
nect a CATV cable and a network wire from the
incline trainer, depending on how far the incline
trainer will be moved.
Due to the size and weight of the incline trainer,
moving it may require two or three people. To
lower the casters, use a hex key and turn each of
Casters
the indicated screws clockwise until the casters
raise the incline trainer. Then, roll the incline trainer
to the desired location. CAUTION: To reduce the
risk of injury, use extreme caution while moving
the incline trainer. Do not attempt to move the
incline trainer over uneven surfaces.
Once the incline trainer has been moved to the
Screw
desired location, turn the screws counterclockwise
Screw
until the incline trainer is resting evenly on the level-
ing feet.
16