Table of Contents
Advertisement
Lock Body
Installation
1. INSERT reader cable through
hole in back of lock body.
2. ALIGN lock body to mounting
holes and secure to cabinet/
drawer face using 2x screw
f and 2x screw d. DO NOT
over tighten. If required use
Screw e or g, instead of f.
3. PLUG cable into slot on lock body.
4. Tuck excess cable into lock body
cavity as shown in Diagram 9.
5. For cabinet/drawer face thicker
than 1/2", add a third Screw d
as shown in Diagram 10.
Diagram 8: Step 1 & 2
Diagram 9: Step 3 & 4
Diagram 10: Step 5
7 of 12
Advertisement
Table of Contents
