Table of Contents
Advertisement
Lighting
Camera 1
Camera 2
Camera 3
Back
Assign
Teach-in call
Internal call
R: 3.24 S: 2.20
Back
30
Lighting
Factory setting: activated
The behaviour of the field of view illumination of
the colour camera is activated or deactivated
here.
The desired camera is selected with
OK
confirmed with OK.
A camera with an activated field of view
illumination is marked with "
With the function activated, the field of view illu-
mination of the colour camera is switched on for
a door call or with manual switching on of the
surface-mounted home station video if the ambi-
ent brightness is less than 1 lux.
With the function deactivated, the field of view
illumination is always switched off.
Setting with several home stations and
i
colour cameras
The illumination setting only applies for the
active surface-mounted home station video and
the active colour camera.
This means that if several home stations and/or
colour cameras are installed, the lighting for
each colour camera must be set individually on
each home station.
Assign
In the "Assign" menu the home station is
>
assigned components from the door communi-
cation system (e.g. door stations, home stations
and switching actuators).
The exact work procedures for assigning compo-
OK
nents from the door communication system are
described in detail from Page 38.
and
".
Advertisement
Table of Contents
