Hose Ice Maker Tube Ass'y - Kenmore STEP UP Service Manual

11. Disassemble/Assemble Procedures
11-3. Hose Ice Maker Tube Assembly
Step
1
2
3
4
Remove one screw attached to the cover
Remove the check valve.
□ Remark :
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
Description
Separate the cover
icemaker Water tube
on the top of cabinet
Using (-) driver.
Pull the water outlet
parts.
Remove a lock clip
from the bend-type
fitting.
※ Follow the reverse order when assembling.
Step
5
6
Remove water tube from the water tube fitting.
7
8
Description
Remove the
icemaker water
tube cover.
Pull out the tube to remove from
the fixtures on back of cabinet.
Pull out the tube in
the direction of the
top cabinet to remove.
56 / 79