8. Operation and Functions
8-1. How to Use Control Panel
ⓕ
ⓐ
Button
Item
-
Initial Temperature by power input
Freezer Temperature
ⓕ
Freezer Accela Chill Function
Refrigerator Temperature
ⓡ
Refrigerator Accela Chill Function
ⓓ →
Switch Temperature Unit ºF ↔ ℃
ⓕⓡ
"Accela Ice" Function
ⓐ
Filter Reset
ⓑ
Select Cubed Ice
ⓒ
Select Crushed Ice
ⓑⓒ
Icemaker off
Turn Dispenser Lamp On
ⓓ
Lock Control Function
To avoid risk of electrical shock that can cause death or severe personal injury,
WARNING
!
disconnect unit from power before servicing unless tests require power.
1
3
4
ⓑ
Display
Freezer : 0ºF / Refrigerator : 37ºF / Pantry room(optional) : "Produce"
88 LED
ºF : 0 → -2 → -4 → -6 → -8(Coldest) → 6 → 4 → 2 → (repeat)
88 LED
℃ : -18 → -19 → -20 → -21 → -22(Coldest) → -15 → -16 → -17 → (repeat)
□ How to Start : Press and hold this button for 3sec.
LED ①
□ How to Proceed : the icon LED ON, Coldest Temp for 3000min
□ How to End : Time Limit or Any press for changing Temp or Power Rest
ºF : 37 → 35 → 33(Coldest) → 45 → 43 → 41 → 39→ (repeat)
88 LED
℃ : 3 → 2 → 1(Coldest) → 7 → 6 → 5 → 4→ (repeat)
□ How to Start : Press and hold this button 3sec.
LED ②
□ How to Proceed : the icon LED ON, Coldest Temp for 360min
□ How to End : Time Limit or Any press for changing Temp or Power Rest
LED
In lock mode, press and hold
The icon LED On, Quick ice cube production mode for 24hr
LED ③
If no water comes into the icemaker for 6hr, the operation is canceled.
Press and hold "Accela Ice" button for 3sec, "Replace Filter" icon LED OFF
LED ④
※ After about 6 months from power on or Filter Reset, the icon LED ON.
LED ⑦
The icon LED ON;
The cubed/crushed ice comes out by pressing the dispenser lever.
LED ⑧
⑤
Press and hold
Press the "Light" button or push any dispenser lever.
-
Press and hold
⑥
The ice or water dispenser does not work during lock mode.
2
5
8
7
Description
ⓡ
buttons at the same time for 5sec
ⓕ
and
ⓑ
ⓒ
and
buttons for 3sec at the same time.
ⓓ
button 3sec to stop operation of different buttons.
Button
LED
6
ⓒ
24 / 79
ⓡ
ⓓ